More info 
EVOPLUS
Continuous supervision and management of systems
DAB has created a range of services and tools for monitoring installations and managing every need in a prompt and efficient way. The DConnect digital services provide effective, versatile solutions, predicting and avoiding any unpleasant surprises, monitoring the systems in real time and controlling them remotely. A solution for every situation: whether you're an installer, maintenance technician, administrator or end user, DAB has the answer.
- Remote monitoring and control 24/7
- Prompt intervention when anomalies occur
- Easier work-load and optimal service
- Reduced management costs
- Constant improvements to system
- Energy savings
EVERYTHING KEPT UNDER CONTROL
From anywhere,
anytime and in real time!
From home, from the office, from work, on the go: wherever there's an Internet connection. With DConnect you can control and manage your pumps from smartphones, tablets or PCs, just as if you were there. Moreover, you can be always updated: finding all the information about any critical issues in a clear and simple way, you will be able to intervene promptly and effectively on site already knowing the reason for the problem, if necessary.
DCONNECT CLOUD PORTAL
All the details at a glance
With the DConnect portal, monitoring your DAB products becomes simple and intuitive. It's so easy to use that any user can immediately find the information they require.
With it, you can control one or more pumps, view every detail of operations or change the various parameters of the pumping system. The multi-installation display and rapid access to data make management of the whole pump array both speedy and efficient.
REAL-TIME ALERTS
To prevent malfunctions, ensure prompt action and increase the life cycle of the pump.
MULTI-INSTALLATION DISPLAYS
To compare the status and performance of different products in multiple systems, identifying the best set-ups and focusing on the crucial installations; to arrange operations in line with deadlines
DATA CONTROL AND MONITORING
To analyse the data remotely, and fine-tune the parameters to maintain or improve the efficiency of the system.
AUTOMATIC REPORTS
To collect data and use it to improve consumption or prevent malfunctions.
REMOTE UPDATES TO THE PUMP
To update systems remotely, enabling new features or fixing critical issues.
Annual subscription
- Like any other items in our life connected to the Internet network, also water pumps are at risk of cyber-attacks.
- For years, DAB has been developing a Cybersicurity culture to guarantee safe and protected solutions for our customers.
- DConnect hardware and software components have been tested following the most stringent international protocols.
- At DAB, the attention for the customer is also demonstrated by the preventive actions and the informed choices implemented in relation to security, with the object of protecting our most advanced technological solutions.
- Appropriate choices during the design stage, keeping a high attention level and continuously releasing updates, is DAB way of protecting the customer.
DAB. Internet Of Pumps
With DConnect digital services, you can connect our smart products to the Internet and control and manage them remotely. So our pumps have become part of the I.o.T. world. Or rather, the I.o.P. world.
Operation diagram
One single interface for all the applications
- The DConnect service can be used to manage one or more pumps, to increase water pressure, to manage drain waters, and water circulation in heating and air conditioning systems.
- It’s a multi-channel service of high added value that irrespective of system nature and size simplifies configuration, always using the same interface and tools. Being modular, DConnect can manage up to 8 different pumps and up to 4 pumps with DConnect box 2, in a highly simple and integrated manner.
Click below on the DConnect Box and DConnect Box 2 to find out which products you can connect.
ESYBOX MAX
ESYBOX MINI3
*Esybox Mini3 with built-in connectivity has a qrcode label near the display, starting from the model featuring software version 3.10 (Software verifiable on packaging and pump menu)
NgPanel
NgDrive
EsyBox
Accessories
Ethernet cable
Required if you want to connect the DConnect Box to your modem / router via cable, RJ-45 connector.
Kit Modem Wi-Fi + wall charger + SIM
It’s a 3G/4G USB modem that requires a data SIM to be installed, which provides Wi-Fi connectivity to the room if a local Wi-Fi network is not available.
DConnect BMS Modbus RTU RS485 adapter kit
It is an additional Modbus RTU interface that allows you to connect all the pumps and electrical panels that can be associated with the DConnect into a supervision system.
Mini UPS for DConnect Box
It is a compact power supply that includes the UPS (uninterruptible power supply) function. It’s able to power the DConnect Box during the absence of mains power for a short time.
DConnect Box IP55 Panel
Panel with IP55 protection rating that protects the DConnect Box from rainwater. For outdoor installations. DConnect Box included.
Configurator
Discover all the connection methods and how many DAB products you can connect to DConnect digital services at the same time
Add to the DConnect Box
Add to the DConnect Box 2
Integrated Connectivity
1
DCONNECT BOX
DCONNECT BOX 2
Integrated Connectivity
Accessories
Subscription
Complete the order using following code/codes:
€year
DAB I.o.P. Internet of Pumps!
The DConnect service consists of a modern and advanced Cloud system, and a hardware component, the DConnect Box, required for connecting the pumps being controlled to the Internet. Thanks to this service, DAB pump can access the I.o.T., or better, the I.o.P.
DAB is always present!
Our customer service is always available for support during the configuration of our products, including the most advanced ones, like the DConnect service!
Immediately ready to use
Installing DConnect does not require any special infrastructure: all you need is a smartphone and an internet connection close to the installation. It only takes a few simple, guided steps to set up the system.
COST REDUCTIONS
There are so many advantages: remote monitoring, more sustainable installations, energy savings and lower bills. Indeed, there's at least one plus for every person for whom the range of services has been designed, as well as benefits for the environment.
OPTIMAL PERFORMANCE
Continuous control and fine-tuning of the system, with real-time monitoring that helps you maintain efficiency over time.
DConnect by DAB is available for Android (Google Play) and iOS (App Store). If you do not have a smartphone compatible with DConnect by DAB, you can still control your devices remotely using a PC or MAC: just go to the dconnect.dabpumps.com website and log in when prompted to do so.
No, there is no software program available. The DConnect service is only available through web browser (PC or MAC) by going to dconnect.dabpumps.com or smartphone/tablet App (downloaded from Play Store or Apple Store), and only with an always active Internet connection. This allows us to keep the software up to date and allow real-time control of connected devices.
It depends. Your products must be compatible: this section shows a full list of compatible products. If your products are in this list, all that is needed is to purchase DConnect Box or the DConnect Box 2 (depending on your needs), connect it to a modem (via cable or via Wi-Fi) that gives access to the internet and connect the devices you they want to check at the DConnect Box/DConnect Box 2 itself.
It means that the product is compatible with the DConnect service. Only MCE-P, MCE-C, ADAC and Ebox products with the DConnect Ready adhesive have hardware compatible with the DConnect service. If your product does not have the adhesive, you can order the "low voltage" card (specific for each product) or the front panel for the Ebox as a spare part, specifying the model you already own.
Any Wi-Fi modem can be used if the signal is strong enough. If not, you can use a 3G/4G modem (with 1 GB of traffic minimum) making sure that the 4G signal is present in the room (just check with a normal smartphone if you can browse the Internet from inside the room). If the signal is poor or absent, it is necessary to have a 4G modem with an external antenna to be placed near windows or entrance doors (on the surface).
DConnect Box is a more advanced product, mainly dedicated to installers or installations that require to control a large number of pumps both by number (up to 8) and by type (some circulator models are also supported). DConnect Box 2, on the other hand, is dedicated to the common user, supporting the control of up to 4 pumps of a smaller type (for example, does not support the Evoplus range). With DConnect Box 2 and a smartphone it is possible to view the pump settings when you are within the same local network. Both remote control products require the DConnect App (available on the App Store or Play Store).
The DConnect Box can be connect to the Internet via Wi-Fi or via Ethernet cable. When it is connected you can follow the instruction on the DConnect App to connect the DConnect Box 2 to the Dab Cloud.
Yes you can. After connecting the Ethernet cable to the modem/router and DConnect Box, simply complete the network configuration as indicated in the Instruction Manual.
If it isn’t possible to connect the Ethernet cable, the DConnect Box integrates an automatic detection function for finding nearby Wi-Fi networks. If the Wi-Fi network does not have a strong signal, the user is alerted. In this case we recommend a Wi-Fi repeater (which amplifies the signal) or a 3G/4G modem (after checking the coverage) to be placed in the room. The modem/router should have 1 GB of traffic minimum.
The latest version of the instruction manual for our products can always be found on the official DAB website.
Dopo aver verificato il collegamento tra E.sybox e D.Connect Box, controllare che quest’ultimo sia aggiornato. Una volta collegato il D.Connect Box a Internet seguendo i passaggi indicati dall’App (o dal programma se si è collegati tramite browser), verificare l’apposita sezione “Aggiorna”. Se è presente un aggiornamento cliccare sull’icona verde e attendere l’aggiornamento del prodotto.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Dopo aver verificato il collegamento tra E.sybox Mini 3 e D.Connect Box, controllare che quest’ultimo sia aggiornato. Una volta collegato il D.Connect Box a Internet seguendo i passaggi indicati dall’App (o dal programma se si è collegati tramite browser), verificare l’apposita sezione “Aggiorna”. Se è presente un aggiornamento cliccare sull’icona verde e attendere l’aggiornamento del prodotto.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Dopo aver verificato il collegamento tra Active Driver Plus e D.Connect Box, controllare che quest’ultimo sia aggiornato. Una volta collegato il D.Connect Box a Internet seguendo i passaggi indicati dall’App (o dal programma se si è collegati tramite browser), verificare l’apposita sezione “Aggiorna”. Se è presente un aggiornamento cliccare sull’icona verde e attendere l’aggiornamento del prodotto.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Dopo aver verificato il collegamento tra E.sylink e D.Connect Box, controllare che quest’ultimo sia aggiornato. Una volta collegato il D.Connect Box a Internet seguendo i passaggi indicati dall’App (o dal programma se si è collegati tramite browser), verificare l’apposita sezione “Aggiorna”. Se è presente un aggiornamento cliccare sull’icona verde e attendere l’aggiornamento del prodotto.
Verificare che anche l’E.sylink abbia l’ultimo firmware disponibile.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
Verificare che anche l’E.sylink abbia l’ultimo firmware disponibile.
Ulteriori informazioni sono presenti nel manuale di istruzioni di D.Connect Box.
For all the information we advise you to consult the instruction manual of the DConnect Box.
It is necessary to have compatible products (in this section there is a complete list). To connect it, simply follow the procedure indicated in the DConnect Box 2 instruction manual.
Dopo aver verificato che il collegamento cablato sia stato eseguito correttamente controllare di aver assegnato un indirizzo diverso ad ogni Evoplus, attraverso il parametro “Ad” e di avere abilitato la comunicazione attraverso il parametro “En”. Tutti i dispostivi connessi devono essere collegati in sequenza creando una catena e l’ultimo circolatore dovrà essere collegato anche al DConnect Box. I parametri “Br”, “Pa”, “Sb” devono essere comuni per ogni circolatore collegato.
Check that the DConnect Box Wi-Fi LED is flashing. If not, close and reopen the App and follow the instructions again.
Each DConnect Box can manage a maximum of eight pumps. To manage more it is necessary to add another DConnect Box to the existing installation.
First you need to check that the individual pumps are up to date. If they are not, update by following the procedure indicated in the instruction manual.
Then:
Carry out the same operation on all the pumps (one at a time) to be inserted in the pressurization unit. A group can consist of a maximum of 4 pumps.
Once associated with each other, the components of the group are shown on the display of each and the blue LED remains on.
The pressurization group can now be connected to the DConnect Box to allow remote control:
On any of the pumps of the group just created repeat steps 1 and 2.
Within 45 seconds, press the left button of the DConnect Box for 5 seconds until the beep. The wireless connection LED will start to flash, remaining fixed once associated with the pump group.
If the association was successful by checking the "AS" menu, a component named "DBox" will appear on the display.
Then:
- Access the “Installer Menu” by pressing the buttons simultaneously for a few seconds and then press the button
until the abbreviation appears on the display “AS”. If it is not associated with any other component, the pump will show the writing “No Dev”.
- Press and hold the button for 5 seconds until the blue led under the display starts flashing.
After that:
Carry out the same operation on all the pumps (one at a time) to be inserted in the pressurization unit. A group can consist of a maximum of 4 pumps.
Once associated with each other, the components of the group are shown on the display of each and the blue LED remains on.
The pressurization group can now be connected to the DConnect Box to allow remote control:
On any of the pumps of the group just created repeat steps 1 and 2.
Within 45 seconds, press the left button of the DConnect Box for 5 seconds until the beep. The wireless connection LED will start to flash, remaining fixed once associated with the pump group.
If the association was successful by checking the "AS" menu, a component named "DBox" will appear on the display.
Yes, it is possible. In this case we already have a group of Esybox associated with the DConnect Box that we want to connect to a single Esybox to be monitored remotely.
First you need to check that the individual pumps are updated to the latest version, and if necessary update. Next, hold down the left button of the DConnect Box 2 Box for 5 seconds until you hear a beep and the wireless connection status LED starts flashing.
First you need to check that the individual pumps are updated to the latest version, and if necessary update. Next, hold down the left button of the DConnect Box 2 Box for 5 seconds until you hear a beep and the wireless connection status LED starts flashing.
- Now, within 45 seconds on the Esybox to add: access the "Installer Menu" by pressing the buttons simultaneously for a few seconds, then press the buttonuntil the abbreviation "AS" appears on the display. If the Esybox is not associated with any other component, the word "No Dev" will appear.
- Press and hold the pump button for 5 seconds until the blue led under the display starts flashing. The DConnect Box wireless connection LED will start to flash, remaining fixed once associated with the pump group.
If the association was successful by checking the "AS" menu, a new component will appear on the display.
No, it is currently not possible to create mixed installations between Esybox and Esybox Mini 3.
At any retailer of DAB products, or by contacting our agencies.
Contact the customer service.
Any Wi-Fi modem can be used if the signal is strong enough. If not, you can use a 3G/4G modem, making sure that the 4G signal is present in the room (just check with a normal smartphone if you can browse the Internet from inside the room). If the signal is poor or absent, it is necessary to have a 4G modem with an external antenna to be placed near windows or entrance doors (on the surface).
DConnect Box is a more advanced product, mainly dedicated to installers or installations that require to control a large number of pumps both by number (up to 8) and by type (some circulator models are also supported). DConnect Box 2, on the other hand, is dedicated to the common user, supporting the control of up to 4 pumps of a smaller type (for example, does not support the Evoplus range). With DConnect Box 2 and a smartphone it is possible to view the pump settings when you are within the same local network. Both remote control products require the DConnect App (available on the App Store or Play Store).
The DConnect Box 2 can be connect to the Internet only via Wi-Fi. When it is connected you can follow the instruction on the DConnect App to connect the DConnect Box 2 to the Dab Cloud.
No, it is not possible, the DConnect Box 2 doesn’t have the Ethernet port.
DConnect Box 2 integrates an automatic detection function for finding nearby Wi-Fi networks. If the Wi-Fi network does not have a strong signal, the user is alerted. In this case we recommend a Wi-Fi repeater (which amplifies the signal) or a 3G/4G modem (after checking the coverage) to be placed in the room.
The latest version of the instruction manual for our products can always be found on the official DAB website.
After checking the connection between Esybox and DConnect Box 2, check that the latter is updated. Once the DConnect Box 2 is connected to the Internet by following the steps indicated in the DConnect App check the appropriate "Update" section. If there is an update, click on the green icon and wait for the product to update. If the Esybox software is particularly outdated, a manual update may be required, you can do it by following the instructions in the product manual or in the related FAQ. Further information can be found in the DConnect Box 2 instruction manual.
After checking the connection between Esybox Mini 3 and DConnect Box 2, check that the latter is updated. Once the DConnect Box 2 is connected to the Internet by following the steps indicated by the DConnect App, check the appropriate "Update" section. If there is an update, click on the green icon and wait for the product to update. If the Esybox Mini 3 software is particularly outdated, a manual update may be required, you can do it by following the instructions in the product manual or in the related FAQ. Further information can be found in the DConnect Box 2 instruction manual.
Only the Ebox switchboard with the appropriate sticker (DConnect Ready) is compatible with the DConnect service. If your product does not have the adhesive, you can order the "low voltage" card or the front panel for the Ebox as a spare part, specifying the model you already own.
For all the information we advise you to consult the instruction manual of the DConnect Box 2.
It is necessary to have compatible products (in this section there is a complete list). To connect it, simply follow the procedure indicated in the DConnect Box 2 instruction manual.
Check that if Wi-Fi led of the DConnect Box 2 is flashing, if not, close and reopen the DConnect App and follow the instructions indicated on the app again.
Yes, it is possible. In this case we already have a group of Esybox associated with the DConnect Box 2 that we want to connect to a single Esybox to be monitored remotely.
First you need to check that the individual pumps are updated to the latest version, and if necessary update. Next, hold down the left button of the DConnect Box 2 Box for 5 seconds until you hear a beep and the wireless connection status LED starts flashing.
Now, within 45 seconds on the Esybox to add: access the "Installer Menu" by pressing the buttons simultaneously for a few seconds, then press the button until the abbreviation "AS" appears on the display.
If the Esybox is not associated with any other component, the word "No Dev" will appear.
First you need to check that the individual pumps are updated to the latest version, and if necessary update. Next, hold down the left button of the DConnect Box 2 Box for 5 seconds until you hear a beep and the wireless connection status LED starts flashing.
Now, within 45 seconds on the Esybox to add: access the "Installer Menu" by pressing the buttons simultaneously
If the Esybox is not associated with any other component, the word "No Dev" will appear.
- Press and hold the pump button for 5 seconds until the blue led under the display starts flashing. The DConnect Box 2 wireless connection LED will start to flash, remaining fixed once associated with the pump group. If the association was successful by checking the "AS" menu, a new component will appear on the display.
F Esybox già associato allo stesso DConnect Box 2
No, it is currently not possible to create mixed installations between Esybox and Esybox Mini 3.
At any retailer of DAB products, or by contacting our agencies.
It is necessary to delete the pump to be replaced from the list of connected pumps and insert the new one following the procedure described in the instruction manual.
DConnect Box is a more advanced product, mainly dedicated to installers or installations that require to control a large number of pumps both by number (up to 8) and by type (some circulator models are also supported). DConnect Box 2, on the other hand, is dedicated to the common user, supporting the control of up to 4 pumps of a smaller type (for example, does not support the Evoplus range). With DConnect Box 2 and a smartphone it is possible to view the pump settings when you are within the same local network. Both remote control products require the DConnect App (available on the App Store or Play Store).
- PLC connection (PowerLine Communication, directly to the controlled pump)
- Dab proprietary Wi-Fi on (for the direct connection with the controlled pump)
- Button for the local Wi-Fi
- Dab Cloud established
- Wi-Fi connection
- Input
- Relè
- Modbus
- Modbus
| Led/Icons | ||||
| Led/icona | PLC (1) | Personalized Wireless (2) | Cloud Service (4) | Wi-Fi (5) |
| Off | No connection | No connection | No connection | No connection |
| Blinking | Waiting for the connection | Waiting for the connection | Waiting for the connection | |
| On | Connect | Connect | Connect | Connect |
The DConnect by DAB app is available for Android (Google Play) and iOS (App Store). If you do not have a smartphone compatible with DConnect by Dab, it is possible to control the devices remotely via PC or MAC from the browser, by accessing the website www.dconnect.dabpumps.com and logging in (or registering in the case of first access ). NOTICE! The first connection with the device must be made from a smartphone!
First you need to download the DConnect by Dab app for iOS or Android. Once the app is started, follow the simple wizard for choosing a username and password. We have a step-by-step video guide that can helps with the procedure: Youtube video
You must have the DConnect by Dab app installed (available for Android or iOS) on your smartphone and have a valid account. Once the app is started, select "Direct connection" and from there the wizard allows you to associate Esybox Max with the account. We have a video guide with all the steps: Youtube video
Of course, first you need to make sure that Esybox Max is associated with your DConnect account, then, once you start the app and choose the pump, you will be able to see the various operating parameters, including the setpoint that can be changed by simply pressing on it. We have a video guide explaining the procedure: Youtube video
The supply voltage of the NgPanel must be the same as that of the pumps used. For example, if the panel is fed with a supply voltage of 3~400V the pumps must be at 3~400V. For example, if the panel is fed with a supply voltage of 1~230V the pumps must be at 1~230V.
For more information you can read the NgPanel instruction manual.
No, if 2 pumps are used, they must be identical.
For more information you can read the NgPanel instruction manual.
No, the pump capacitor can be placed inside the NgPanel, on the metal bracket provided. Take care because in the NgPanel they share the same contactor as the pump.
For more information you can read the NgPanel instruction manual.
As inputs the NGPANEL accepts either floats, level probes or depth sensors. Particular care must be taken:
- Floats and level probes cannot be used at the same time.
- Level probes can only be used with clear, clean water.
- The maximum level and minimum level alarms can be generated by floats or by level probes, or, if the depth sensor is used, by thresholds of the value read by the sensor itself.
It is possible, to use the alarm inputs so that the pumps stop in the case of reaching the maximum level, or too high motor temperature. In the case of an alarm, the pumps stop, the buzzer sounds, the corresponding alarm outputs are activated. For more information you can read the NgPanel instruction manual.
- Floats and level probes cannot be used at the same time.
- Level probes can only be used with clear, clean water.
- The maximum level and minimum level alarms can be generated by floats or by level probes, or, if the depth sensor is used, by thresholds of the value read by the sensor itself.
It is possible, to use the alarm inputs so that the pumps stop in the case of reaching the maximum level, or too high motor temperature. In the case of an alarm, the pumps stop, the buzzer sounds, the corresponding alarm outputs are activated. For more information you can read the NgPanel instruction manual.
- Overloads and excess temperature with automatic reset
- Excess currents in pumps (overload protection)
- Abnormal voltages
- Lack of phase and thermal protection KK
- Dry operation
- Rapid restarts
- Inconsistency of floats and/or probes
- Blocking of the pumps
For dry run protection: the panel has an input for dry run protection, signaled by a float immersed in the pump tank that the panel controls. The device must be connected to the S contact of the NgPanel, and positioned in the tank at a level that ensures that the pump is not damaged as a result of dry running (consult the installation and operation instructions of the product used). For thermal protection of the motors: the device has an input for the thermal protection of each motor. If the motor used is equipped with thermal protection, this protection can be connected to the KK terminals. If the protection is not present in the motor, the terminals must be bridged. For further information, we recommend reading the NgPanel instruction manual.
Yes, the NgPanel can be used as a control and protection panel for draining systems. As control inputs, floats,level probes or a depth sensor can be used.
For more information you can read the NgPanel instruction manual.
The alarm log is easily accessible in the list of pages in the main menu, immediately above the "Overview" menu page. This page shows the event history starting with the most recent one recorded by the system. In the event of system and/or pump problems, check the information pop-up on the display and follow the step by-step instructions. For more information you can read the NgPanel instruction manual.
The device is designed to be fixed directly to the wall or on the motor body of the pump. In both cases a specific fixing kit is used. For fixing to the motor body, refer to the specific quick guide for the swing. To fix it to the wall, follow the instructions in the NgDrive instruction manual.
To choose the type of sensor to use, refer to those listed on the control panel if present or on the DConnect APP. The mode of use will depend on the settings made on the control panel if present or on the DConnect APP. The device accepts various types of differential pressure sensors. The cable must be connected on one side to the sensor and on the other to the specific pressure sensor input of the variable frequency drive. The cable has two different terminations with mandatory insertion direction: connector for industrial applications (DIN 43650) on the sensor side and 4-pole connector on the variable frequency drive side.
For further information we recommend consulting the NgDrive instruction manual.
For further information we recommend consulting the NgDrive instruction manual.
To choose the type of sensor to use, refer to those listed on the control panel if present or on the DConnect APP. The mode of use will depend on the settings made on the control panel if present or on the DConnect APP.
For further information we recommend consulting the NgDrive instruction manual.
For further information we recommend consulting the NgDrive instruction manual.
The pumping groups are divided into:
By twin group we mean a pumping group made up of a single pump body on which two motors are mounted.
By multi-pump group we mean a group made up of several identical pump, motor and variable frequency drive elements. Each element shares both the suction and the delivery. Each pump, before flowing into the delivery manifold, must have a non-return valve.
Twin Group Connections
In twin groups the pressure sensor must be connected to the left variable frequency drive (looking at the group from the motor fan side so that the fluid flow goes from bottom to top). For correct operation of the twin system it is necessary that all the external connections of the input terminal block are connected in parallel between the variable frequency drives respecting the numbering of the individual terminals.
If a banging noise is heard during the switch between turning off one motor and turning on the other, then proceed as follows: 1) access the Multipump Group menu page;
2) select the item “Configuration of multipump group parameters”; 3) follow the procedure up to the "Exchange time" item;
4) increase the “Exchange Time” value until the noise disappears;
For further information we recommend consulting the NgDrive instruction manual.
- twin groups
- multi-pump groups
By twin group we mean a pumping group made up of a single pump body on which two motors are mounted.
By multi-pump group we mean a group made up of several identical pump, motor and variable frequency drive elements. Each element shares both the suction and the delivery. Each pump, before flowing into the delivery manifold, must have a non-return valve.
Twin Group Connections
In twin groups the pressure sensor must be connected to the left variable frequency drive (looking at the group from the motor fan side so that the fluid flow goes from bottom to top). For correct operation of the twin system it is necessary that all the external connections of the input terminal block are connected in parallel between the variable frequency drives respecting the numbering of the individual terminals.
If a banging noise is heard during the switch between turning off one motor and turning on the other, then proceed as follows: 1) access the Multipump Group menu page;
2) select the item “Configuration of multipump group parameters”; 3) follow the procedure up to the "Exchange time" item;
4) increase the “Exchange Time” value until the noise disappears;
For further information we recommend consulting the NgDrive instruction manual.
To choose the type of sensor to use, refer to those listed on the control panel if present or on the DConnect APP. The mode of use will depend on the settings made on the control panel if present or on the DConnect APP.
The variable frequency drive accepts the 0 – 5V ratiometric pressure sensor.
The cable must be connected on one side to the sensor and on the other to the specific pressure sensor input of the variable frequency drive.
The cable has two different terminations with mandatory insertion direction: connector for industrial applications (DIN 43650) on the sensor side and 4-pole connector on the variable frequency drive side.
For further information we recommend consulting the NgDrive instruction manual.
The variable frequency drive accepts the 0 – 5V ratiometric pressure sensor.
The cable must be connected on one side to the sensor and on the other to the specific pressure sensor input of the variable frequency drive.
The cable has two different terminations with mandatory insertion direction: connector for industrial applications (DIN 43650) on the sensor side and 4-pole connector on the variable frequency drive side.
For further information we recommend consulting the NgDrive instruction manual.
Per la scelta del tipo di sensore di utilizzare fare riferimento a quelli elencati da pannello di controllo se presente o da APP DConnect. La modalità di utilizzo sarà dipendente dalle impostazioni effettuate su pannello di controllo se presente o da APP DConnect.
Il sensore di flusso viene fornito assieme al proprio cavo. Il cavo deve essere collegato da un lato al sensore e dall'altro all'apposito ingresso sensore di flusso dell'inverter.
Il cavo presenta due diverse terminazioni con verso di inserzione obbligato: connettore per applicazioni industriali (DIN 43650) lato sensore e connettore a 6 poli lato inverter.
Il sensore di flusso viene fornito assieme al proprio cavo. Il cavo deve essere collegato da un lato al sensore e dall'altro all'apposito ingresso sensore di flusso dell'inverter.
Il cavo presenta due diverse terminazioni con verso di inserzione obbligato: connettore per applicazioni industriali (DIN 43650) lato sensore e connettore a 6 poli lato inverter.
To create a multi variable frequency drive system it is necessary to follow the pumping group creation procedure.
The sensors can be connected to only one variable frequency drive.
Data communication between the variable frequency drives takes place via wireless, however it is recommended to fit the communication cable to strengthen the system in the event of a fault in order to be able to read the sensors even if connected to a faulty or switched off variable frequency drive. For correct operation of the multi variable frequency drive system it is necessary that all the external connections of the input terminal block are connected in parallel between the variable frequency drives respecting the numbering of the individual terminals. The only exception is the disable functionality which can be set on any of the 4 inputs and allows you to disable the variable frequency drive; in this case the command can also be distinguished for each variable frequency drive.
For further information we recommend consulting the NgDrive instruction manual.
The sensors can be connected to only one variable frequency drive.
Data communication between the variable frequency drives takes place via wireless, however it is recommended to fit the communication cable to strengthen the system in the event of a fault in order to be able to read the sensors even if connected to a faulty or switched off variable frequency drive. For correct operation of the multi variable frequency drive system it is necessary that all the external connections of the input terminal block are connected in parallel between the variable frequency drives respecting the numbering of the individual terminals. The only exception is the disable functionality which can be set on any of the 4 inputs and allows you to disable the variable frequency drive; in this case the command can also be distinguished for each variable frequency drive.
For further information we recommend consulting the NgDrive instruction manual.
